Polytetrafluoroethylene pipe material PTFE rods

Polytetrafluoroethylene
Product Overview:
Polytetrafluoroethylene (PTFE), commonly known as "non-stick coating" or "easy to clean material". This material has the characteristics of acid and alkali resistance, resistance to all kinds of organic solvents, almost insoluble in all solvents. At the same time, PTFE has the characteristics of high temperature resistance, its friction coefficient is very low, so it can be used for lubrication, but also become the ideal coating for easy to clean the inner layer of water pipe.
Friction is the force that prevents objects from moving (or tending to move) relative to each other. The lower the coefficient of friction, the easier it is for the surfaces of the two objects to chafe and the friction will cause wear and tear, which will shorten the service life of the material. This can affect product efficiency and reduce performance, which increases the cost of parts replacement and maintenance. For example, a material with a rough and hard surface (such as steel) will wear more easily when rubbed against a softer material. Generally speaking, plastic is a very good wear material, especially in high speed, high pressure conditions.Ptfe Engineering Plastics
Plastics have a very low coefficient of friction, making them ideal for sliding applications. In addition, most plastics have high wear resistance under dry operating conditions.
Especially bearing applications, need a part to slide on another part, usually there is a very serious wear phenomenon. Thermoplastics work well in these applications, where the low friction coefficient plays a crucial role. In addition to wear resistance, these thermoplastics have many other advantages, such as good corrosion resistance, light weight and low noise. Parts made of these thermoplastics generate lower friction and heat, which improves part life and ultimately reduces maintenance costs.

Features:
1. High lubrication, it is the lowest friction coefficient among solid materials
2. Chemical corrosion resistance, insoluble in strong acid, strong base and organic solvent
3. High and low temperature resistance, with good mechanical toughness
4. Non-flammability
Performance Parameters:
Performance unit parameter
The expression density g/cm³ is 2.10~2.30
Tensile strength MPa 14.0~18.0
Elongation at break % 140~230
Specification selection:
Category Diameter (mm) Length (mm)
4,5,6,7,8,9,10,13,15,16,18,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,100,110,120,130,140,150,160,170,180,190,200 extrusion Rods 1000
Moulded rods, 180200250270300350400500600, 100-300

Application Field:
Ptfe is used as engineering plastic, suitable for friction, wear and bearing, can be made into PTFE pipe, rod, plate, etc., generally used in Pipes, containers, pumps, valves, etc. Can make pipe, plate, rod, bearing and chemical pipe, pipe fittings, equipment container lining, etc., used in electrical, chemical, machinery and other industries.